# Skew polytope

A **skew** polytope is generally speaking a polytope whose interiors cannot be well defined. The classical example is a polytope of rank n whose vertices do not all lie in an n-dimensional subspace.

## Definitions[edit | edit source]

Whether a polytope is skew is largely an informal concept with no fixed rigorous definition. This section will present several potential definitions and a comparison of them. Some of the definitions here are not in wide use but are included for comparison purposes.

- A polytope is skew when its vertices do not all lie in an n-dimensional subspace, where n is the rank of the polytope.
- A polytope is skew when its vertices do not all lie in an n-dimensional subspace, where n is the rank of the polytope, or has proper elements which are skew.
- A polytope is skew when its vertices do not all lie in an n-dimensional subspace, where n is the rank of the polytope, or has proper elements or figures which are skew.
- Given the following two definitions of a polytope, a polytope is skew when it meets definition 2 but not definition 1.
- A polytope is an abstract polytope and an injective mapping π of its elements onto closed connected subsets of Euclidean space, such that
- for an element x of rank n, is a set whose affine span has n dimensions,
- the boundary of is the union of π applied to the proper elements of x,
- iff .

- A polytope is an abstract polytope and an injective mapping of its vertices into Euclidean space.

- A polytope is an abstract polytope and an injective mapping π of its elements onto closed connected subsets of Euclidean space, such that
- A polytope is skew when there exists an abstractly equivalent polytope with the same symmetry whose vertices lie in a lower dimensional subspace than the original polytope.

Polytope | Definition | ||||
---|---|---|---|---|---|

1 | 2 | 3 | 4 | 5 | |

Skew cube | Skew | Skew | Skew | Skew | Skew |

Square duocomb | Skew | Skew | Skew | Skew | Non-skew |

Petrial cube | Non-skew | Skew | Skew | Skew | Non-skew |

Mucube | Non-skew | Non-skew | Skew | Skew | Non-skew |

Regular zigzag | Non-skew | Non-skew | Non-skew | Skew | Skew |

Digon | Non-skew | Non-skew | Non-skew | Skew | Non-skew |

Square | Non-skew | Non-skew | Non-skew | Non-skew | Non-skew |

The first four definitions are each strictly stronger than the last. Meaning that every polytope that is skew by definition 1 is also skew by definition 2, every polytope that is skew by definition 2 is skew by definition 3, etc. Definition 3 is the most widely cited definition for skew polytopes, although it fails to include some polytopes like the zigzag which are commonly considered skew. Polytopes that meet definition 5 are the results of blending and often have skew in their name.

## Skew polygons[edit | edit source]

Consider a 3-dimensional antiprism (more specifically, the alternation of a uniform or semi-uniform prism). The edges can be divided into three sets, those being the edges of the two capping polygons and the zigzagging edges that form a ring around the middle. This last set forms a polygon that is both isogonal and isotopic, making it a regular polygon. The vertices lie in two planes, as opposed to one as seen in conventional polygons.

### Uniform polygons[edit | edit source]

All uniform non-skew polygons are regular, but this does not apply to skew polygons. There are skew polygons that are uniform but not regular. Some examples include truncations of regular blended polygons (sometimes called 'wavy polygons'), or the Petrie polygons (see below) of apeirogon - polygon duocombs.

### Petrie polygons[edit | edit source]

In the above description, the distance between alternating vertices is the edge length, but this need not be so. In particular, every regular polytope (of 3 or more dimensions) has a corresponding skew polygon. This is formed by taking connecting edges of the polytope, with the following rule: *every n – 1 connected edges are in the same facet, but n connected edges do not share a facet.*

These are the Petrie polygons.

### Skew apeirogons[edit | edit source]

Apeirogons can be considered skew even if they are coplanar. For example, the regular zigzag skew apeirogons formed by the triangle-triangle edges of the apeirogonal antiprism. There are also helical apeirogons, which exist in three dimensions.

## Skew polyhedra[edit | edit source]

The five Platonic solids, namely, the tetrahedron, the cube, the octahedron, the dodecahedron and the icosahedron have been known for thousands of years, and that these were the *only* convex regular polyhedra. Johannes Kepler discovered the great icosahedron and the great stellated dodecahedron. There were two other polyhedra that Kepler overlooked (as they don’t obey the Euler equality, ), and it was left to Louis Poinsot to discover the small stellated dodecahedron and the great dodecahedron.

This was proved to be the complete set by Augustin-Louis Cauchy.

However, to quote Coxeter,

One day in 1926, J. F. Petrie told me with much excitement that he had discovered two new regular polyhedra; infinite, but free from false verticesSkew polyhedra either have skew faces or skew vertex figures. The three infinite regular polyhedra described above (the mucube, muoctahedron, and mutetrahedron) are examples of the latter. The Petrials of these three and the Petrials of the three regular tilings (square tiling, triangular tiling, and hexagonal tiling) are just some of the 27 infinite regular polyhedra with skew faces (those faces being helices or zigzags). And the finite regular polyhedra with skew faces are the Petrials of the nine Platonic and Kepler-Poinsot solids.^{[1]}. When my incredulity had begun to subside, he described them to me: one consisting of squares, six at each vertex [fig], and one consisting of hexagons, four at each vertex [fig]. It was useless to protest that there isno roomfor more than four squares round a vertex. The trick is, to let the faces go up and down in a kind of zig-zag formation, so that the faces that adjoin a given “horizontal” face lie alternately “above” and “below” it. When I understood this, I pointed out a third possibility: hexagons, six at each vertex [fig].^{[2]}

## Comparison[edit | edit source]

If *n* is the rank of a polytope or element and *m* is the dimension of the Euclidean space where it is realized, standard planar polytopes have *m* = *n* for every element, skew polytopes have *m* > *n* for some element, and tilings have *m* = *n* - 1 for the polytope itself.

## External links[edit | edit source]

- Wikipedia Contributors. "Regular skew polyhedron".
- Wikipedia Contributors. "Skew polygon".

## References[edit | edit source]

- ↑ Places where, due to the self-intersecting nature of some of the non-convex polytopes, apparent vertices can be found, but which do not demark the vertices of the constituent facets.
- ↑ Coxeter, H.S.M.
*The Beauty of Geometry: Twelve Essays*Dover Publications, Inc., 1999, pp. 78-79, italics in original.

This article is a stub. You can help Polytope Wiki by expanding it. |